1. Introduction of roller mill
Roller mill is a kind of grinding equipment, that widely used in various non-metallic minerals. It can produce powders with particle size range from coarse to ultra-fine. Roller mill equips with multiple layers of rollers and rings, and it utilizes the effects of impact, extrusion and gravity to grind material.
There are many features of roller mill that make it a widely used grinding mill.
2. The features of roller mill
● The multi-layer rolling design of roller mill makes it particularly suitable for processing various non-metallic minerals, with Mohs hardness below 6 and humidity within 7%.
● It can achieve product fineness within 325-2500 mesh, from coarse powder to ultra-fine powder, and the finest finished product can reach D97≤5μm.
● When producing products of the same fineness, roller mill has higher production efficiency, lower energy consumption and lower production cost compared with other mills.
● Under the condition of the same production capacity, roller mill requires less capital investment and shorter payback period compared with other mills.
● The equipment is easy to install. It needs neither multi-layer steel structure platform or concrete platform, nor large-scale civil engineering. Once the equipment is installed, it can be put into production.
● The grinding roller and grinding ring of roller mill are made of high hardness wear-resistant materials. This can ensure uninterrupted and reliable operation of the equipment.
● The entire equipment operates under negative pressure, and the dust collection rate is as high as 99.9%, these two factors ensure a pollution-free production process.
3. Tóm tắt
With advantages mentioned above, roller mill has a wide range of application. For example, non-metallic minerals, with Mohs hardness below 6 and humidity within 7%, eg: talc and calcite, can all be ground with roller mill.
Công ty TNHH Máy móc bột Qingdao Epic là một nhà sản xuất specializing in the production of powder machinery.
Các sản phẩm chính của chúng tôi bao gồm:
– Nhà máy: máy xay công nghiệp, máy nghiền bi, air classifier mill(ACM), jet mill, turbo mill and impact mill, etc.
– Bộ phân loại: include four series of air classifiers: HTS, ITC, MBS and CTC.
– Surface coating modifiers: bộ điều chỉnh pin-mill, bộ điều chỉnh tuabin-mill and three-roller-mill modifier, etc.
– Thiết bị phụ trợ: tủ điều khiển, máy hút bụi và thang máy gầu xúc, v.v.
– Khách hàng có thể tùy chỉnh sản phẩm theo nhu cầu thực tế. Một khách hàng, một thiết kế.
If you are interested in roller mill or other products from Sử thi Thanh Đảo, liên hệ với nhân viên của chúng tôi trực tiếp, chúng tôi luôn sẵn sàng phục vụ bạn.
