1. နိဒါန်း
The reason why powder flows is essentially the imbalance of forces on particles in the powder. Analysis shows that the forces acting on particles include gravity, adhesion between particles, friction and electrostatic force etc. Among them, the greatest influences on powder flow are gravity and adhesion between particles. What’s more, factors of particle size distribution and particle shape also have important influence on powder fluidity. Additionally, factors of temperature, water content, electrostatic voltage, porosity, bulk density, bonding index and internal friction coefficient, and humidity in the air can also affect powder fluidity. Below we will analyze several important factors.
2. Main factors affecting powder fluidity
2.1. Particle size
The specific surface area of powder is inversely proportional to particle size. The smaller the particle size, the larger the specific surface area. First, as particle size decreases, the molecular attraction and electrostatic attraction between powders gradually increase, this reduces the fluidity of powders; Secondly, the smaller the particle size, the easier it is for particles to aggregate into agglomerates, and then the greater the adhesion, this increases the angle of repose and poor fluidity; Thirdly, as particle size decreases, particles are more likely to form tight stack, this reduces the air permeability, increases the compression, thereby reducing the fluidity of powders.
2.2. Shape
Besides particle size, particle shape also has a significant impact on powder fluidity. Powders with the same particle size but different shapes have different fluidity. It is obvious that the smallest contact area between spherical particles, the best fluidity they have. For needle-shaped particles, their surface has lots of plat contact points as well as shear forces between irregular particles, so their fluidity is poor.
2.3. Temperature
As the temperature continues to rise, the powder fluidity increases first and then decreases. At low temperature, the density of particles increases as the temperature increases, this improves powder fluidity; however, when the temperature is too high, the adhesion of particles increases, this decreases powder fluidity. At the same time, higher temperature will affect bulk density and tap density of powders, thereby reducing powder fluidity.
2.4. Moisture content
When the powder is dry, the fluidity is generally good, but if too dry, the particles will attract each other due to electrostatic effects, causing bad fluidity. When powders contain a small amount of water, the water adsorbed on the surface of particles would have little effect on powder fluidity. While, as water content keeps increasing, a water film is formed around the adsorbed water on the particles, and then the resistance between particles increases, this results in low powder fluidity. When water content exceeds the maximum molecular bound water, the more water content, the worse the powder fluidity.
3. Conclusion
There are many factors that affect powder fluidity, and we will not go into details here. In conclusion, the enhancement of powder fluidity has an important impact in many fields. For example: in pharmaceutical, chemical and metallurgical industries, powder fluidity can affect production efficiency. If the powder has good fluidity, the production line can run smoothly. At the same time, powder fluidity also directly affects the quality of final products. Moreover, powder fluidity has an important impact on production safety. Powders with poor fluidity may cause static electricity during production, causing safety hazards. Therefore, the importance of powder fluidity in industrial production is self-evident.
Qingdao Epic Powder Machinery Co., Ltd. တစ်ခုပါ။ ထုတ်လုပ်သူ အမှုန့်အပြောင်းအလဲနဲ့ပစ္စည်းကိရိယာများထုတ်လုပ်မှုအတွက်အထူးပြု။ We own lots of practical experience on how to increase the fluidity of powders.
အဓိကထုတ်ကုန်များပါဝင်သည်:
– ကြိတ်: ဘောလုံးကြိတ်, ကြိတ်စက်, jet mill, air classifier mill(ACM), vibration mill and impact mill etc.
– အမျိုးအစားခွဲသည်။: လေအမျိုးအစားခွဲစက် လေးခု၊ HTS, ITC, MBS and CTC.
– ပြုပြင်မွမ်းမံခြင်း။: pin-mill modifier, တာဘိုစက်မွမ်းမံမှု and three-roller modifier etc.
– အရန်ပစ္စည်းများ: ထိန်းချုပ်ရေးဝန်ကြီးအဖွဲ့, ဖုန်စုပ်စက် ဓာတ်လှေကား စသည်တို့၊
- ဖောက်သည်များသည် ၎င်းတို့၏ လိုအပ်ချက်အရ စက်ပစ္စည်းများကို စိတ်ကြိုက်ပြင်ဆင်နိုင်သည်၊ ဖောက်သည်တစ်ယောက် ဒီဇိုင်းတစ်ခု.
ထုတ်ကုန်တွေကို စိတ်ဝင်စားတယ်ဆိုရင် Qingdao Epic, please ဝန်ထမ်းဆက်သွယ်ပါ။ တိုက်ရိုက် ကျွန်ုပ်တို့သည် သင့်ဝန်ဆောင်မှုတွင် အမြဲရှိနေပါသည်။
အောက်တွင် ဓါတ်ပုံများ ပါရှိပါသည်။ Qingdao Epic သင်၏အကိုးအကားအတွက်။
