pin mill

Pin Mill for Powder Coating

Principle and characteristics: when the equipment is running at high speed, it drives the strong air flow, so that the agglomerated powder particles stay in the stator of the equipment, and the stator is designed as a special groove. The strong vortices formed by wind pressure and wind speed will produce shear force, friction force and centrifugal force, which can quickly break the materials into single particles and reduce them to the original particle size or natural crystal particles.

Pin Mill working principle

The classifier and cyclone separator, dust collector and induced draft fan form a classifying system.

Under the action of fan suction, the material is moved from the lower inlet of the classifier to the classifying zone with the ascending airflow. Under the strong centrifugal force generated by the high-speed rotating turbine, the materials are separated and the fine particles which meet size requirements through the classifier impeller gap into the cyclone separator or the dust collector, the coarse particles entrained part of the fine particles collided with the wall and the velocity disappeared, descending along the cylinder wall to the secondary air outlet, and the coarse and fine particles were separated by the strong washing action of the secondary air. The fine particles rise to the classification zone for secondary classifying, and the coarse particles are lowered to the discharge port for discharging.

Features of Pin Mill

  • Pintype crushing disc, no screen structure, fast speed, large capacity and low heat generation.
  • Single power or double power can be selected, the line speed can reach up to 240m/s, strong impact force and shear force, and the product particle size is fine.
  • It is suitable for dispersing and deagglomerating
  • It is suitable for continuous high-speed mixing for ultrafine powder and liquid, and particle surface coating modification.
  • It can be equipped with an air classifier to control the product fineness.
  • Compact in structure, the mill is extremely easy to disassemble and clean.

Pin Mill Technical Parameters

Type Model 250 400 500 630 800
Grinding Motor Power(kW) Fineness(mesh) 20 - 200 20 - 200 20 - 200 20 - 200 20 - 200
speed(m/s) 75 - 85 75 - 85 75 - 85 75 - 85 75 - 85
power(kw) 7.5 18.5 22 37 55
Blade speed(m/s) Fineness(mesh) 60 - 300 60 - 300 60 - 300 60 - 300 60 - 300
speed(m/s) 100 - 120 100 - 120 100 - 120 100 - 120 100 - 120
power(kw) 15 30 37 55 75
Ultra fine powder Fineness(mesh) 100-2500 100-2500 - 100-2500 100-2500
speed(m/s) 200-240 200-240 - 200-240 200-240
power(kw) 15 x 2 30 x 2 - 30 x 2 30 x 2

Projects

Projects in these field

Partner Companies

EPIC offers the best quality and good service in 160 countries and areas in the world.

30M

RESPOND WITHIN 30 MINUTES

24H

PROVIDE TECHNICAL SOLUTIONS IN 24 HOURS

2H

REPLY TO CUSTOMER QUESTIONS IN 2 HOURS

72H

PROVIDE SOLUTIONS WITHIN 72 HOURS

Contact EPIC

Please fill in the form below.Our experts will contact you within 6 hours to discuss your needs for machine and processes.

    Please prove you are human by selecting the key

    Factory Address:
    NO. 369, Road S209, Huanxiu , Qingdao City, China
    E-mail:
    Tel:
    Website: